Arc flash and system study data collection
Photograph equipment nameplates in the field. AI reads the data in seconds. Export directly to SKM PowerTools, ETAP, or EasyPower. What used to take two days of re-keying takes two hours.
Start free trial →Transformer T-1
Built to support NFPA 70E, IEEE 1584, NETA, and OSHA compliance requirements.
Why 70ez
Traditional data collection means walking a facility with a clipboard, photographing every nameplate, then sitting at a desk re-keying every number into your analysis software. The data ends up scattered across spreadsheets that don't match the as-builts, PDFs in three different places, and field notes nobody can read a week later. That re-entry step eats days on a large study. Days billed at $150 to $250 an engineer-hour.
70Ez eliminates the re-entry step. The AI reads what the camera captured. You verify. You export. Arc flash studies must meet NFPA 70E and IEEE 1584 requirements. The data 70Ez collects goes straight into the software that runs those calculations.
When the five-year NFPA 70E re-study arrives, your baseline data is already organized in 70Ez. Update what changed. Export again. You're not rebuilding from scratch.
How it works
01
Name the project, add the facility details, and optionally pre-load a one-line diagram or equipment schedule. Takes under five minutes. You're ready to walk the site.
02
Use any phone or tablet. Photograph transformers, panels, breakers, motors, cables, whatever your study requires. 70Ez organizes everything by location as you go. The whole crew can work the same project at once.
03
The moment you capture an image, AI extracts manufacturer, ratings, voltages, impedance, serial number, and more. Review the results. Flag anything that looks off. Confirm what's correct. No typing.
04
When the survey is complete, generate your export file. Open it in your analysis software. The data is already there, organized and ready to run. No import mapping, no manual cleanup.
What's included
Point your camera at any transformer, panel, breaker, or motor nameplate. AI extracts manufacturer, ratings, voltages, and model data automatically. What used to take hours of re-keying now takes seconds per device.
No special hardware. Any phone or tablet. The whole crew works the same project at once. Field techs photograph equipment, engineers review data from the office, all in real time.
Every study gets its own project. Equipment is organized by location, area, and type. Know exactly what's been surveyed and what still needs documentation.
When the survey is done, export to SKM PowerTools, ETAP, or EasyPower. Open it in your software and the data is already organized. No field mapping, no cleanup required.
Every AI-extracted field goes through a verification step before it's locked. Flag uncertain readings, add notes, annotate exceptions. Your export is clean before it leaves the app.
No per-study fees. No per-device charges. Run as many studies as your team can handle. Your bill is the same in a slow month and a heavy one.
Pricing
Field
Solo consultant or small contractor
$199
per month
Team
Engineering firms and mid-size contractors
$499
per month, up to 8 users
Enterprise
Large contractors and national firms
Custom
contact us for pricing
For contractors: speed is revenue.
Every hour saved on data collection is an hour you can bill somewhere else. Faster studies mean more studies per month. Engineers who use 70Ez take on more jobs without adding field time and win bids by promising faster turnaround.
All plans include a 14-day free trial. No credit card required to start.
Free download
Every data point you need, organized by equipment type. Transformers, breakers, fuses, cables, switchgear, and panels. Get the PDF sent to your inbox.
Ready to move faster
Start a project. Walk a facility. Export before the day is over.
14-day free trial. No credit card required.
If 70Ez doesn't cut your data collection time on the first study, cancel and pay nothing.